How Do You Repair Holes In Wood

Download Article

Download Commodity

It's very easy to damage wood and create a big hole. Whether your particular is a wooden wall or a slice of piece of furniture, yous can hands repair information technology using some craft sticks and wood filler. In one case you've covered the hole with wood filler, prime and paint it to give it a smooth, new terminate.

1. 1

   Gather your materials. Select water-based forest filler, primer, and paint if the item you are repairing is kept indoors, or solvent-based forest filler and oil-based primer and paint if the item will be placed outdoors. Yous'll also need craft sticks, disposable plates, PVA glue, woods mucilage, 120-dust sandpaper, and paintbrushes or rollers.^[ane]

   • Gather onetime apparel, rags, a canvas or drop cloth, painter'south record, and a paint stirrer too.

2. two

   Glue craft sticks together to comprehend the hole. The arts and crafts sticks will provide a support for you lot to utilise the forest filler to. Audit the size of the pigsty and decide how many craft sticks it would take to cover it.^[ii]

   • For example, if a pigsty can be filled by 3 craft sticks, lay them flat on a work surface adjacent. Cascade glue over the back of the 3 craft sticks. Identify 3 more craft sticks on pinnacle of the start three to create a strong layer that's stuck together properly.
   • The amount of arts and crafts sticks you'll have to apply depends on the size of the hole.
   • Give the glue 10 to xv minutes to dry out.

   Advertisement

3. three

   Identify the craft sticks on the back of the pigsty and secure them with wood glue. Place the glue around the edge of the hole in your woods. You should lay the arts and crafts sticks on the side they won't exist seen from. If you're filling a hole in a cabinet, wall, or a wardrobe, place the craft sticks on the within of the pigsty.^[iii]

   • If you're covering a hole in a wall or wood that you tin't place on a flat surface, you might need to concur the craft sticks for five minutes so they stick to the glue.

   Advertizing

1. 1

   Mix your wood filler using a craft stick and a dispensable newspaper plate. Follow the directions on the tin of the wood filler you're using. Directions vary depending on the manufacturer. In that location's no demand to mix a large amount of forest filler. A small amount of wood filler on the plate will do the job.^[4]

   • Ensure that the room is well ventilated as wood filler has a very strong odor.
   • The filler is fully mixed when it turns orangish-brown in color.

2. two

   Apply the forest filler to the arts and crafts sticks to fill the hole. Once your wood filler is mixed, employ information technology quickly. Apply the filler to the arts and crafts sticks using another craft stick or a putty pocketknife. The craft sticks will act every bit a back up for the forest filler. The filler should be level and fifty-fifty with the surface of the woods.^[five]

3. three

   Let the filler dry for 1 hour before using 120-dust sandpaper on information technology. In one case the filler is dry, rub it with 120-grit sandpaper. You will need to utilize a decent amount of pressure when rubbing the filler with the sandpaper. Keep using the sandpaper until it'south level with the rest of the wood.^[6]

   • If you're using a pad sander on the filler, utilize 220-dust sandpaper instead. Pad sanders are handheld devices that can powerfully sand wood.

4. iv

   Apply a cloth to clean the wood and remove the dust. Hold your material nether the tap for a couple of seconds and wipe the area of the wood you just filled in. You might demand to wipe the expanse a couple of times if the hole was very large or if you used a lot of filler.^[7]

   • Wiping the area with a cloth is also necessary before you prime number the woods.

   Advert

1. i

   Place a sheet on the floor or on your work surface before y'all prime. If you're painting a wooden wall, identify a sheet on the floor to catch any drips of paint. If you lot're painting a wooden cabinet or another item that you tin move, place it on acme of a canvas to ensure maximum protection for the surrounding expanse.^[8]

   • Motility any furniture abroad before you paint. If the furniture is too big to move, encompass information technology with another canvas.
   • Encompass baseboards, hinges, and other items with painter's tape if you demand to.

2. 2

   Apply a primer to the woods. Primer makes it easier for the paint to stick to the surface of the item you're painting. If y'all're painting a wooden wall and y'all have the paint yous used for the remainder of the wall when you originally painted it, you'll only need to prime the area you lot filled in with wood filler. If yous desire to paint the entire expanse of the wooden object, yous'll demand to prime number information technology all.^[ix]

   • Apply a roller to prime a wall and a paintbrush to prime smaller objects.

3. 3

   Requite the primer 3 hours to fully dry. Primer can dry within 2 hours of existence practical to an item. However, if y'all paint the primer before it's dry, yous'll ruin the item you lot're painting. By giving it 3 hours to fully dry, you allow for the primer to dry completely.

   • Don't paint over the primer before it's completely dry. Primer tin feel dry to the impact without being fully dry.

4. 4

   Apply the commencement glaze of paint to the woods. In one case the primer has completely dried, apply a paintbrush or a roller to apply the first coat to the woods. Rollers will work best on walls and other flat surfaces. Paint other surfaces using a flat or tapered paintbrush.^[10]

   • If yous're just painting over the filler, use the same paint you painted the residue of the item with. If you tin can't find that paint, go to the local paint store and take paint strips. Hold these strips to the woods to observe the right colour of paint.
   • Don't be afraid to use enough of paint. It's ameliorate to utilize too much paint to the item than as well niggling. Brand certain you brush the pigment so it evenly covers the surface of the particular.
   • Utilize even and measured strokes like yous used to use the primer.

5. five

   Give the commencement glaze 2 to 3 hours to completely dry. You lot should requite the paint time to properly dry into the wood. This volition take 2 hours at the very least. Test if the paint is dry by dabbing it with a tissue. Audit the tissue later on for signs of pigment. If at that place'south no paint on the tissue, the paint is dry and you tin apply the 2d glaze.^[11]

   • Consider leaving the paint dry overnight to ensure information technology's completely dry out.

6. 6

   Employ the 2nd glaze of paint to the wood. After the first coat has fully stale, employ fifty-fifty and measured strokes once more to apply the second coat. Once you finish applying the second coat, wait at the woods and make up one's mind if it needs some other coat. If the pigment doesn't await right on the forest, it will probably need another glaze.^[12]

7. 7

   If you lot decide to apply another coat, follow the procedure again. Give the second coat 2 to 3 hours to dry out earlier painting the third glaze.

   Advertizement

Add New Question

• Question

  Tin can I just sand the wood around a gouge to go far even?

  

  Tanglewood Sue is a DIY and Upcycling Specialist and the Possessor of Tanglewood Works out of Hyattsville, Maryland. With over nine years of experience, Sue specializes in upcycled painted article of furniture and other handmade, personalized, and sustainable goods. With her passion for art and reinvention, marketing feel, and Bachelor's Degree in Circulate Media, Sue has been able to create a business that not just provides quality pieces just empowers customers to create their works through her library of DIY tutorials and live demos as well as DIY supplies.

  

  DIY & Upcycling Specialist

  Expert Respond

  You can, but that's going to exist a lot of sanding. Unless you lot're dealing with a very sparse scratch or gouge, this is probably an inefficient style to get virtually it.

• Question

  Why do I have to sand the wood filler down after it dries?

  

  Tanglewood Sue is a DIY and Upcycling Specialist and the Owner of Tanglewood Works out of Hyattsville, Maryland. With over nine years of experience, Sue specializes in upcycled painted furniture and other handmade, personalized, and sustainable appurtenances. With her passion for art and reinvention, marketing feel, and Available's Degree in Broadcast Media, Sue has been able to create a business concern that not merely provides quality pieces just empowers customers to create their works through her library of DIY tutorials and live demos as well as DIY supplies.

  

  DIY & Upcycling Specialist

  Expert Answer

  Well, you don't have to sand it down, but it's going to stand out pretty badly if you don't. Sanding helps to create a uniform texture earlier you paint or stain information technology.

Enquire a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertizement

• The above method tin be used for all types of wood including teak.

Thank you for submitting a tip for review!

Advertisement

Things You'll Need

• Craft sticks
• Glue
• Wood glue
• Woods filler
• Disposable plate
• 120-dust sandpaper
• 220-dust sandpaper and pad sander (optional)
• Textile
• H2o-based paint for indoors
• Oil-based paint for outdoors
• Paintbrush
• Roller
• Tissue
• Primer
• Sheets
• Painter's tape

Nearly This Article

Article Summary 10

If y'all've noticed a big hole in a piece of wood or furniture, you lot can gear up it with a few supplies from your local home improvement store. If the forest'southward kept indoors, use a water-based wood filler, primer, and paint, merely if it'south kept outdoors, utilise a solvent-based forest filler, oil-based primer, and paint. You'll also need sandpaper and a paintbrush or roller. To fill the pigsty, you'll need to apply the wood filler. Once it'southward stale later on an hour or then, sand the surface to make information technology smoothen. Then, prime number and paint the surface and then it blends in with the rest of the wood. You lot'll need to wait 2 to 3 hours between coats of primer and paint. For more than tips, including how to cover apply craft sticks to help cover a hole from the within, read on!

Did this summary assistance y'all?

Thanks to all authors for creating a page that has been read 76,790 times.

Did this article assist you?

Source: https://www.wikihow.com/Fill-Large-Holes-in-Wood

Posted by: reidfuldn1960.blogspot.com

Share this post